AW-17039250534

Ford Performance Parts

With over 30 years of Ford Performance experience, Capaldi Racing offers a curated selection of Ford Performance parts for track and racing applications. These components are chosen and tested by the same crew that builds and runs Ford-based race cars at national events.

From powertrain to chassis, we can help you select Ford Performance parts that match your build, series and goals.

Ford Racing

8.8" AXLE GIRDLE COVER KIT

Fits 8.8" axle Fits 1986-2004 Mustang GT Low profile design also fits 2005-2014 Mustang GT and 2007-2014 Shelby GT500 Mustang except 2013-2014 Track Pack option Light-weight 356T6 aluminum casting replaces rear cover on 8.8" Load bolts provide additional...

MSRP: $290.00

$258.00

Add to Cart The item has been added

Compare
Ford Racing

BLACK SATIN VALVE COVERS 5

Fits 289/302/351W Die-cast aluminum with baffle Black satin finish Cobra snake logo laser etched Will clear stud gridle and roller rocker arms (3.75" tall) Includes oil fill cap and grommets 50-States Street Legal when installed with appropriate closed...

MSRP: $215.00

$198.00

Add to Cart The item has been added

Compare
Ford Racing

MANUAL TRANSMISSION FLYWHEEL BILLET STEEL 184T 0 OZ-IN. M-6375-N427

MANUAL TRANSMISSION FLYWHEEL BILLET STEEL 184T 0 OZ-IN. Part Number Material/Weight Clutch Damper assembly counter bore Ring Gear Crank Bolts Unbalanced Application Foot Notes M-6375-A302B Billet Steel 23 lbs 6.00"" 157-tooth 6-bolts 28.2 oz.-in...

MSRP: $405.00

$367.00

Add to Cart The item has been added

Compare
Ford Racing

2010-2014 MUSTANG GT & 2011-2014 V6 HIGH-FLOW K&N / FORD RACING AIR FILTER M-9601-MGT

K&N 4 ply panel washable air filter Fits stock 2010-2014 Mustang GT airbox. Will NOT fit 2005-2009. Fits stock 2011-2014 Mustang V6 airbox. Will NOT fit 2005-2010. Fits stock 2012-2013 Mustang Boss 302. Flows approximately 22% more than stock filter at 1...

MSRP: $80.00

$64.50

Add to Cart The item has been added

Compare
Ford Racing

2005-2010 MUSTANG GT BILLET THROTTLE BODY

Fits in factory location on 2005-2010 Mustang GT Does not include calibration, CALIBRATION REQUIRED, sold for tuner use Twin 62mm bore (stock Mustang GT is twin 55mm) CFM Rating: 1306cfm (stock dual 55mm throttle body: 953cfm)* Precision machined from...

MSRP: $990.00

$894.73

Add to Cart The item has been added

Compare
Ford Racing

MUSTANG MATTE BLACK WHEEL

2005-2014 Mustang GT and 2005-2014 Mustang V6 18" x 8" wide 5-lug 4.5" bolt circle 40mm offset 6.3" backspacing Mesh spoke design Cast aluminum with matte black paint finish Clear coated to OEM standards Not for use with OEM Mustang Brembo brakes...

MSRP:

$190.00

Add to Cart The item has been added

Compare
Ford Racing

HIGH-TORQUE MINI STARTER - COYOTE & MODULAR ENGINES M-11000-C50

Fits 5.0L Coyote, 4.6L, 5.4L and 5.8L Modular RWD with automatic and manual transmissions Compact construction, great for header clearance Weighs approximately 6 lbs. Comes with starter cables. Must use diode protected fenderwell solenoid when used in...

MSRP: $320.00

$308.00

Add to Cart The item has been added

Compare
Ford Racing

4.6L 8 BOLT BILLET STEEL MUSTANG FLYWHEEL M-6375-G46A

Part Number Material/Weight Clutch Damper assembly counter bore Ring Gear Crank Bolts Unbalanced Application Foot Notes M-6375-A302B Billet Steel 23 lbs 6.00"" 157-tooth 6-bolts 28.2 oz.-in. Pre-1981 302 engines and 351 engines using 157T flywheels...

MSRP: $405.00

$331.50

Add to Cart The item has been added

Compare
Ford Racing

2005-2014 MUSTANG GT COUPE ASSEMBLED HANDLING PACK

Ford Performance's assembled handling pack includes pre-assembled struts. No spring compressor required, strut/spring assembly is ready to bolt-in! Put a little "road race" into your Mustang GT with Ford Performance's handling pack. It's tuned to deliver...

Compare
4.6L 3V PERFORMANCE INTAKE MANIFOLD

WARNING: This part is designed and intended for competition use only or off-highway use only. It should not be installed on a vehicle that is driven on public roads and highways. Installation of this part on a vehicle driven on public roads and highways...

MSRP: $935.00

$864.71

Add to Cart The item has been added

Compare
Ford Racing

351W/5.8L ENGINE SWAP OIL KIT

351W/5.8L ENGINE SWAP OIL KIT PART NUMBER SUMP CAPACITY FINISH APPLICATION/DESCRIPTION M-6675-A50 Rear 5-quart Painted 5.0L oil pan kit. Includes rear sump oil pan, dipstick, dipstick tube, pickup, and main cap stud. Ideal for engine swaps. Fits...

MSRP: $290.00

$286.25

Add to Cart The item has been added

Compare
Ford Racing

MUSTANG BOSS 302 ENGINE OIL COOLER

Original equipment on 2012-2013 Mustang Boss 302. Fits 2011-2014 Mustang GT with 5.0L 4V Ti-VCT engine Engine mounted oil cooler Water-to-oil type cooler Kit includes Boss 302 radiator hose with integral oil cooler fitting Uses M-6731-FL820 Ford Racing...

MSRP: $195.00

$163.50

Add to Cart The item has been added

Compare
Ford Racing

2005-2010 MUSTANG GT HIGH LIFT HOT ROD CAM SET

WARNING: This part is designed and intended for competition use only or off-highway use only. It should not be installed on a vehicle that is driven on public roads and highways. Installation of this part on a vehicle driven on public roads and highways...

MSRP: $1,160.00

$1,074.88

Add to Cart The item has been added

Compare
Ford Racing

5.0L 4V TIVCT 90MM THROTTLE BODY INTAKE SPACER M-9474-M50

Fits 2011-2014 Mustang GT Spacer used to adapt M-9926-M5090 90MM billet aluminum throttle body to 5.0L Mustang GT TiVCT intake manifold Spacer rotates throttle body approximately 15% counter clockwise to clear intake cover

MSRP: $75.00

$63.50

Add to Cart The item has been added

Compare
Ford Racing

2005-2009 MUSTANG GT DUAL FUEL PUMP KIT M-9407-GT05

Includes harness, dual fuel pumps, drop in housing and fuel pump driver module from the 2007-2009 Mustang Shelby GT500 Fits 2005-2009 Mustang GT. For 2010 use M-9407-MSVTA Includes harness, dual fuel pumps, drop in housing and fuel pump driver module...

MSRP: $1,100.00

$1,073.00

Add to Cart The item has been added

Compare