Chassis and Frame Components

Fits 2005-2009 Mustang GT Coupe Original equipment on convertible and 2007-2009 Shelby GT500 Increases chassis stiffness

Ballast 2.5lb Puck Ballast - Puck - 2-1/2 lb - Natural - Each

Ballast 25lb Clamp On Ballast - Clamp-On - 25 lb - Natural - Each

Ballast 25lb Ballast - 4 x 8 x 2 in - 25 lb - Natural - Each

Ballast 30lbs 2.5 x 2.5 x 12 Ballast - 2.5 x 2.5 x 12 in - 30 lb - Natural - Each

Ballast 5lb Puck Ballast - Puck - 5 lb - Natural - Each

Ballast 40lb Ballast - 12 x 3.5 x 2.5 in - 40 lb - Natural - Each

Ballast 10lb Clamp On Ballast - Clamp-On - 10 lb - Natural - Each

Ballast 25lb 9-1/2in x 6-3/4in x 1in Ballast - 9-1/2 x 6-3/4 x 1 in - 25 lb - Natural - Each

Rear Support Kit Chassis Support Kit - Rear - Pre Cut / Notched - 1-3/4 in OD - 0.095 in Wall Thickness - Steel - Natural - Kit

RH Jack Post Kit Jack Post - Steel - Natural - Offset Chassis - Kit

Front Support Kit Chassis Support Kit - Front - Pre Cut / Notched - 1-3/4 in OD - 0.095 in Wall Thickness - Steel - Natural - Kit

Door Plate 1/8 x 4 x 48 Door Plate - 4 ft Long - 4 in Wide - 1/8 in Thick - Steel - Natural - Each

Front Arch Support - 24 in Wide - 16 in Tall - 1-3/4 in OD - 0.095 in Wall Thickness - Steel - Natural - Each

Frame Repair Plate for Metric Chassis Frame Repair Plate - Rear Frame - Weld-On - 27 in Long - 4-1/4 in Wide - 1/8 in Thick - Steel - Natural - GM A-Body / G-Body - Each