Ford Performance

Original equipment on 2012-2013 Mustang Boss 302. Fits 2011-2014 Mustang GT with 5.0L 4V Ti-VCT engine Engine mounted oil cooler Water-to-oil type cooler Kit includes Boss 302 radiator hose with...

Fits 2024 Mustang GT and 2.3L Mustang EcoBoost with manual or automatic transmissions Fits LHD and RHD Mustang Original equipment on 2024 Mustang Dark Horse with heated steering wheel, paddle...

8.8" differential Fits 31 spline axles Torsen T-2R (Race) type differential with high bias 4.0 ratio To achieve the higher bias ratio the assembly is more complex and designed for race durability...

2005-2014 Mustang GT and 2005-2014 Mustang V6 18" x 8" wide 5-lug 4.5" bolt circle 40mm offset 6.3" backspacing Mesh spoke design Cast aluminum with matte black paint finish Clear coated to OEM...

Production 2007-2012 Mustang Shelby GT500 intercooler coolant circulation pump Used to circulate water through supercharger intercooler and heat exchanger Inlet and outlet hose connection diameter is...

These serious wheel stud and lug nut kits are like those used on GT350RC and GT4 road race cars. They are intended for use on the FP350S, GT4, GT350RC and track cars requiring high quality, strength...

  For single 4V carburetors Die-cast aluminum lid with stamped steel base Black satin finish ""Mustang"" logo Assembly height is 2.5"" Includes mounting hardware

PAC 1219X Valve Spring as used on M-6049-Z304DA Cylinder Heads   O.D. Large End (in) 1.207€ I.D. Small End (in)   0.650€ Installed Height (Valve Closed) (in)         145 lbs. @ 1.800€ Open Valve...

Ford Performance worked with one of the most recognized names in Off-Road lighting, RIGID®, to develop this hood hinge Off-Road Light Kit which works exclusively on the 2019-2021 Ranger.  The kit...

Includes one stabilizer bar link with bushings Includes one sway bar link with bushings Fits M-5490-B Sway Bar Kit

Includes one sway bar link with bushings Fits M-5490-C Sway Bar

Includes one sway bar link with bushings Fits M-5490-A Sway Bar Kit

  Fits 5.0L/5.8L production heads and GT-40 heads For production stamped steel and Ford Racing bolt-on roller rockers Ties 2 rocker arms together for proper alignment

 Production roller pilot bearing fits 4.6L/5.4L and 5.0L 4V TIVCT modular engines  Similar to M-7600-B but for higher load applications Pre-greased do not add extra grease. Clutch and bearing damage...

Production roller pilot bearing fits 4.6L/5.4L and 5.0L 4V TIVCTÂ modular engines Production roller pilot bearing fits 4.6L/5.4L and 5.0L 4V TIVCT modular engines NOTE: Pre-greased do not add extra...